RISK ANALYSIS OF STEEL BOX GIRDER INSTALLATION USING HIRARC METHOD
Karunia Az Zahra*
Wateno Oetomo
Sajiyo
Research on the Aloha flyover construction project aims to determine the risks that occur in the workmanship of installing steel box girder, knowing the level of risk that occurs in the workmanship of installing steel box girder and knowing how to control the risks that occur in the workmanship of installing steel box girder. The method used in this research is the Hazard Identification Risk Assessment and Risk Control (HIRARC) method guided by the Malaysia HIRARC Guidelines (2008). Starting from identifying hazards at each stage of the work activity, a risk assessment is carried out, the results of which can be used as a reference for risk control, so as to reduce the risk of work accidents. The results of the analysis from the identification of hazards and risks arising in 5 stages of work and a total of 11 potential hazard findings were obtained. (1) Preparation stage for steel box girder erection maneuver; (2) The process of leveling/compacting the erection area soil for preparation of crawler crane footing/foundation; (3) The process of mobilizing steel box girder material from stockyard to erection area; (4) Installing slings + seals that will be used during steel box girder erection; (5) The process of installing steel box girder using crawler crane.
Albani Musyafa, S. T. (2020). Analisis Penerapan Sistem Manajemen Kesegedung Lamatan Dan Kesehatan Kerja (Smk3) Pada Proyek Konstruksi (Studi Kasus: Proyek Pembangunan Gedung Dprd Sleman, Yogyakarta).
Asprila Akbar, A. (2019). Perencanaan Sistem Manajemen K3 (Smk3) Pada Pekerjaan Erection Girdr Proyek Relokasi Jalan Tol Ruas Porong-Kejapanan Dengan Identifikasi Bahaya, Penilaian Resiko Dan Pengendalian Resiko Metode (Hirarc). Institut Teknologi Sepuluh Nopember.
Hazani. (2008). Guidelines For Hazard Identification, Risk Assessment And Risk Control (Hirarc). 20 Oktober 2015. Https://Www.Dosh.Gov.My/Index.Php/Competent-Person-Form/Occupational-Health/Guidelines/Hirarc-2/1846-01-Guidelines-For-Hazard-Identification-Risk-Assessment-And-Risk-Control-Hirarc-2008?Path=Guidelines/Hirarc-2
Hazani Binti Ismail. (2008). Guidelines For Hazard Identification, Risk Assessment And Risk Control (Hirarc). Departemen Of Occupational Safety And Health Ministry Of Human Resources Malaysia. 20 Oktober 2015. Https://Www.Dosh.Gov.My/Index.Php/Competent-Person-Form/Occupational-Health/Guidelines/Hirarc-2/1846-01-Guidelines-For-Hazard-Identification-Risk-Assessment-And-Risk-Control-Hirarc-2008?Path=Guidelines/Hirarc-2
Hidayat, M. C., & Nuruddin, M. (2022). Analisis Identifikasi Bahaya Kecelakaan Kerja Menggunakan Job Safety Analysis (Jsa) Dengan Pendekatan Hazard Identification, Risk Assessment And Risk Control (Hirarc)(Studi Kasus Pt. Smelting Plan Refinery). Justi (Jurnal Sistem Dan Teknik Industri), 2(4), 557–569.
Ilham, M. A. (2021). Analisis Smk3 Terhadap Risiko Kecelakaan Kerja Pembangunan Jalan Tol Menggunakan Metode Hirarc. Universitas Medan Area.
Juraman, M. F. T., & Beatrix, M. (2023). Evaluasi Penerapan Keselamatan Dan Kesehatan Kerja (K3) Menggunakan Metode Hirarc Pada Proyek Preservasi Jalan Rigid Pavement Babat-Lamongan-Gresik. Jurnal Taguchi: Jurnal Ilmiah Teknik Dan Manajemen Industri, 3(1), 462–473.
Kanugrahan, T. R., Puspita, A. D., & Sajiyo, S. (2022). Analisa Penerapan Sistem Manajemen Keselamatan Dan Kesehatan Kerja Menggunakan Metode Hirarc Di Pt. Agr Unit Arf. Jiso: Journal Of Industrial And Systems Optimization, 5(2), 106–112.
Lensun, T. G. B., Inkiriwang, R. L., & Tjakra, J. (2022). Analisis Risiko Keselamatan Kesehatan Kerja Dan Lingkungan (K3l) Dengan Metode Hiradc Pada Proyek Pembangunan Jembatan Dan Oprit Boulevard Ii. Tekno, 20(82), 957–971.
Moniaga, F., & Rompis, V. (2019). Analisa Sistem Manajemen Kesehatan Dan Keselamatan Kerja (Smk3) Proyek Konstruksi Menggunakan Metode Hazard Identification And Risk Assessment. Jurnal Ilmiah Realtech, 15(2), 65–73.
Oetomo, W. (2014). Manajemen Proyek Dan Konstruksi Dalam Organisasi Kontemporer Bagian I. Penerbit Pt Mediatama Saptakarya, Jakarta.
Ramli, S. (2010). Sistem Manajemen Keselamatan Dan Kesehatan Kerja Ohsas 18001. Jakarta: Dian Rakyat.
Ri, K. P. U. (2014). Peraturan Menteri Pekerjaan Umum Nomor 05/Prt/M/2014 Tentang Pedoman Sistem Manajemen Keselamatan Dan Kesehatan Kerja (Smk3) Konstruksi Bidang Pekerjaan Umum. Peraturan Menteri Pekerjaan Umum, 41.
Salsabilla, F. R. A. Y. (2023). Analisis Risiko Kesehatan Dan Keselamatan Kerja (K3) Menggunakan Metode Hirarc (Hazard Identification Risk Assessment And Risk Control) Pada Proyek Konstruksi Pembangunan Jalan Temajuk–Aruk.
Suharni, S. (2020). Analisis Risiko K3 Dengan Metode Hirarc Pada Pekerja Pt. Varia Usaha Beton Makassar Tahun 2020. Window Of Public Health Journal, 1(3), 2721–2920.
Triswandana, I. (2020). Penilaian Risiko K3 Dengan Metode Hirarc. Ukarst: Universitas Kadiri Riset Teknik Sipil, 4 (1), 97–108.