THE EFFECT OF CUTTING SPEED ON CUTTING QUALITY WITH LASER CUTTING MACHINE
##plugins.themes.EpsilonTheme.article.main##
Arya Yusuf*
This research investigates the influence of cutting parameters on a laser cutting machine when used on acrylic material. The primary objective of this study is to analyze how cutting speed, electric current, and the type of material affect the quality of the cutting results. An experimental method was employed by varying the cutting speed and adjusting the electric current during the process, followed by measuring the width and precision of the cuts produced. The findings indicate that as cutting speed increases, the width of the cut decreases, resulting in a finer cut. Additionally, higher electric currents can enhance the precision of the cut, ensuring more accurate results. Furthermore, materials with lower melting points were found to be easier to cut with less effort. These results emphasize that the correct combination of cutting parameters is crucial in achieving optimal cutting performance and improving productivity. This study concludes that careful calibration of cutting speed, current, and material selection is essential for obtaining high-quality laser cutting outcomes and enhancing manufacturing efficiency.
Akhmad, A. A. (2009). Pemesinan nonkonvensional plasma arc cutting. Jurnal Rekayasa Mesin Universitas Sriwijaya, 9(2), 51-56.
Badoniya, P. (2018). CO2 laser cutting of different materials-A review. Int. Res. J. Eng. Technol, 5(6), 1-12.
Budianto, Y. A. (2021). Optimasi Parameter Pemesinan Cnc Laser Cutting Berbasis Desain Eksperimen Untuk Mengurangi Terjadinya Defect (Doctoral dissertation, Universitas Atma Jaya Yogyakarta).
Chryssolouris, G. (2006). Laser machining: theory and practice. Springer Science & Business Media.
Halim, G., Asroni, A., & Budiyanto, E. (2022). Analisa kerja mesin CNC laser cutting CO2 2 axis berbasis MACH3 pada variasi pemotongan. ARMATUR: Artikel Teknik Mesin & Manufaktur, 3(1), 28-36. https://doi.org/10.24127/armatur.v3i1.1935
Liu, Y., Zhang, R., Wang, J., & Wang, Y. (2021). Current and future lithium-ion battery manufacturing. IScience, 24(4), 1-17. https://doi.org/10.1016/j.isci.2021.102332
Martowibowo, Y. S., & Andriansyah. (2007). Optimisasi Proses Pemesinan Edm Wire Cut Untuk Modus Gerak Sirkular Menggunakan Algoritma Genetik. Jurnal Teknik Mesin, 22(2), 62-68.
Oh, S., Lee, I., Park, Y. B., & Ki, H. (2019). Investigation of cut quality in fiber laser cutting of CFRP. Optics & Laser Technology, 113, 129-140. https://doi.org/10.1016/j.optlastec.2018.12.018
Saputro, A. E., & Darwis, M. (2020). Rancang Bangun Mesin Laser Engraver and Cutter Untuk Membuat Kemasan Modul Praktikum Berbahan Akrilik. Jurnal Pengelolaan Laboratorium Pendidikan, 2(1), 40-50. https://doi.org/10.14710/jplp.2.1.40-50
Saputro, F. N., & Sumbodo, W. (2019). Pengaruh Ketinggian Torch Terhadap Lebar Kerf Dan Kekasaran Permukaan Pada Pemotongan Cnc Plasma Arc Cutting Dengan Bahan Baja St 37. Jurnal Kompetensi Teknik, 11(2), 22-27.
Sugiyono. (2019). Metode Penelitian Kuantitatif, Kualitatif, dan R&D. Bandung: Alfabeta.
Yusuf, A., Alijrih, F. A., Sabri, A. A., Gibran, S. O., Febriansyah, M. N., Andrian, S. H., & Biworo, M. (2024). Pengaruh Waktu Dalam Proses Elektroplating Dengan Pelapisan Kuningan Terhadap Ketebalan Dan Ketahanan Baja Karbon. TEKTONIK: Jurnal Ilmu Teknik, 1(4), 193-199. https://doi.org/10.62017/tektonik
