STUDY OF COST AND TIME ANALYSIS USING THE TIME COST TRADE-OFF (TCTO) METHOD IN THE CONSTRUCTION PROJECT OF THE OFFICE BUILDING OF A GOVERNMENT AGENCY (OPD) IN PASURUAN
Main Article Content
In construction project control, the main factors of concern are quality, time and cost control. So it is necessary to use one method in the implementation of its control. This study aims to analyze the time and cost of the Raci OPD Office Building Construction project. The benefit of this research is to anticipate potential delays that occur in the project. The problem limitation is focused on work that has not been completed in the remaining time of the contract period. To analyze time and cost, this research uses Critical Path Method (CPM) and Time-Cost Trade- Off (TCTO) which begins with determining the work network and critical path. TCTO analysis is carried out by shortening the duration of work by adding 3 hours of overtime and calculating the Crash Slope of each job on the critical path. Rescheduling is done by accelerating the work that has the lowest cost The results showed that the most effective rescheduling was carried out on the Lt.3 Installation and Plastering work with the acquisition of an acceleration duration of 8 days. And the total cost required for this acceleration is Rp. 29,441,424, - or Rp. 1,226,726,- per day for 24 days.
Budianto, E. A., & Husin, A. E. (2021). Analisis Optimasi Waktu Dan Biaya Dengan Metode Time Cost Trade Off Pada Proyek Gudang Amunisi. Jurnal Aplikasi Teknik Sipil, 19(3), 305–310.
Danang Prihandoko, S. T., Klinzabilal, T., Rifqi, T. M., & Ezki, V. (2022). Penerapan Metode Cpm Dan Pert Pada Pt. Xyz Dalam Pembangunan Proyek Apartemen Garden Di Tangerang. Banking and Management Review, 11(1), 1526–1542.
Dannyanti, E. (2010). Optimalisasi pelaksanaan proyek dengan metode PERT dan CPM. Semarang. Universitas Diponegoro.
Institute, H. P. M. (2017). A guide to the project management body of knowledge (PMBOK® guide).
JAYA, P. T. S. (n.d.). Analisis Penjadwalan Proyek Menggunakan Metode.
Lilyana, L. (2020). Analisis Network Planning dengan Critical Path Method (CPM) Dalam Rangka Efisiensi Waktu dan Biaya Proyek Pembangunan Rumah Minimalis (Studi Kasus: Property Group Medan). Jurnal Sistem Komputer Dan Informatika (JSON), 2(1), 80–89.
Mantel, S. J., Meredith, J. R., Shafer, S. M., & Sutton, M. M. (2001). Project management in practice. J. Wiley.
Manurung, E. H. (2018). Analisis Percepatan Durasi Proyek dengan Penambahan Biaya Minimal. Prosiding Semnastek.
Oetomo, W., Priyoto, P., & Uhad, U. (2017). Analisis Waktu dan Biaya dengan Metode Crash Duration pada Keterlambatan Proyek Pembangunan Jembatan Sei Hanyu Kabupaten Kapuas. Media Ilmiah Teknik Sipil, 6(1), 8–22.
Rakasyiwi, G. R., Witjaksana, B., & Tjendani, H. T. (2022). Project Scheduling Analysis Using The Critical Path Method–Case Study: Subsidized House Construction Project In Hill Mulya Housing, Samarinda City. International Journal On Advanced Technology, Engineering, And Information System, 1(4), 73–88.
Rosyid, R., Sarya, G., Beatrix, M., & Oetomo, W. (2020). Studi Analisis Biaya Dan Waktu Menggunakan Metode Time Cost Trade Off (TCTO) Pada Proyek Telkom Manyar-Surabaya. Extrapolasi, 17(1), 20–29.
Sa’adah, N., & Rijanto, T. (2021). Evaluasi Proyek Pembangunan Gedung Stroke Center (Paviliun Flamboyan) Menggunakan Metode Critical Path Method (CPM) Dan Crashing. Publikasi Riset Orientasi Teknik Sipil (Proteksi), 3(2), 55–62.
Saputra, N., Handayani, E., & Dwiretnani, A. (2021). Analisa Penjadwalan Proyek dengan Metode Critical Path Method (CPM) Studi Kasus Pembangunan Gedung Rawat Inap RSUD Abdul Manap Kota Jambi. Jurnal Talenta Sipil, 4(1), 44–52.
Soeharto, I. (1999). Manajemen Konstruksi (satu). Erlangga.
Yaqin, H. N., Tjendani, H. T., & Witjaksana, B. (2023). Analysis of The Acceleration of Time and Cost of Implementing Building Construction Projects Using The Critical Path Method (CPM) Method. Devotion Journal of Community Service, 4(2), 336–346.